The VPX backplane from mistral is of 6U size with 12 slots. The PCBs intended for the backplane are the TMS board, PPC board and Switch board. The 6U 12 Slot VPX Backplane will route signals from these boards to the rear connectors of the backplane.

This VPX backplane from mistral is of 6U size with 10 slots. The VPX backplane is designed to host Intel boards and Ethernet Switch boards. The VPX backplane will transmit the I/O signals from these boards to the rear connectors of the backplane.

This VPX backplane from Mistral is of 6U size with 10 slots. The VPX backplane is designed to host Intel boards and Ethernet Switch boards.

6U OpenVPX Backplanes support VITA 66 and 67 optical and RF apertures for connectivity including VITA 67.3 RF/Optical modules. These backplanes are available in VME / VPX hybrid versions and support Legacy Boards and the latest VPX boards.

3U OpenVPX Backplanes supporting VITA 66 and 67 optical and RF apertures for connectivity including VITA 67.3 RF/Optical modules are available in VME/VPX hybrid versions supporting legacy boards and the latest VPX boards.

The Intel Arria Processing Card from Mistral is a sophisticated 6U Double Euro card-based Processing Card, designed specifically for outdoor Radar applications. With Intel® Arria® 10 FPGA at its core, the Intel Arria Processing Card features a Dual-core ARM Cortex-A9 HPS core, embedded high-speed transceivers, and a hard memory controller.

The CHAMP-FX7 from Curtiss-Wright Defense Solutions is a rugged, high performance, adaptable real-time processing board featuring AMD’s groundbreaking Versal Adaptive SoC devices.

The XF07-RLDRAM high-performance user-programmable FPGA XMC from Curtiss Wright supports both fast DDR3 SDRAM and RLDRAM memory banks for FPGA-based co-processing applications

Designed for superior durability and reliability, the VPX3-E320 incorporates Curtiss-Wright’s industry-leading rugged hardware design and validation practices to meet the stringent requirements of the most demanding front-line environments.

The VPX3-534 from Curtiss Wright is a high-performance single slot RF digitizing transceiver with two 6 Gsps 12bit ADC channels, also configurable as four 3 Gsps ADC channels, and two 6 Gsps very low latency DAC channels.

3U VPX Data Processing Engine based on Xilinx Zynq Ultrascale+ RFSoC Gen3 integrates multi-gigasample RF data converters and soft-decision forward error correction (SD-FEC) into an SoC architecture.

3U VITA-46 VPX Data Processing Engine based on Xilinx Zynq Ultrascale+ RFSoC Gen3 integrates multi-gigasample RF data converters and soft-decision forward error correction (SD-FEC) into an SoC architecture.

Rugged Kintex-7 FPGA based XMC with digital IO is ideal for demanding applications including radar, imaging and test equipment across commercial and defense market spaces and SWaP constrained platforms such as UAVs and fighter aircraft.

Quad 500MSPS 14b Kintex-7 XMC Digital Receiver ideal for demanding applications including radar, imaging and test equipment across commercial and defense market spaces.

Quad 250MSPS 16b Kintex-7 XMC Digital Receiver that directly interfaces to a user-programmable Xilinx FPGA which allows high-performance processing such as Digital Down Conversion (DDC), filtering, and custom algorithms.

3U VPX Virtex-7 FPGA rugged dual-channel 4GSPS ADC/DAC is ideal for SWaP constrained platforms such as UAVs, fighter aircraft and ground vehicles.

The rugged VPX3-4924 NVIDIA Tesla Pascal GPU processor board from Curtiss Wright is designed and manufactured by Wolf Advanced Technology. This board is part of a family of GPU modules available from Curtiss-Wright Defense Solutions to enable development of High-Performance Embedded Computing (HPEC) systems

The rugged 3U OpenVPX™ form factor VPX3-493 from Curtiss Wright supports NVIDIA’s size, weight, power and cost (SWAP-C) optimized 2.6 TFLOPS T1000 GPU devices. The VPX3-493 is designed to work with Intel® processor-based single board computers (SBC) such as the Curtiss-Wright VPX3-1260 8th Gen Xeon board.

The VPX3-4935 3U VPX GPU processor card from Curtiss Wright delivers incredible processing power from its NVIDIA Quadro Turing TU104 GPU, providing an impressive 3072 CUDA cores for parallel processing and a 50% improvement in performance per CUDA core compared to the previous Pascal generation.

The rugged XMC-4902 NVIDIA Quadro Pascal GP107 processor mezzanine module from Curtiss Wright is designed and manufactured by Wolf Advanced Technology. The board is part of a family of GPU modules available from Curtiss-Wright Defense Solutions to enable the development of High-Performance Embedded Computing (HPEC) systems.

The VPX6-4955 from Curtiss Wright delivers incredible processing power from not one, but two NVIDIA Quadro Turing TU104 GPUs, providing a remarkable 6144 CUDA cores for parallel processing and a 50% improvement in performance per CUDA core compared to the previous Pascal generation. 

The XMC-603 PMC module from Curtiss Wright allows customers to readily incorporate MIL-STD-1553 into military and aerospace embedded computing systems. As one of several products in our comprehensive range of rugged XMC modules, the XMC-603 integrates well with other elements of our product line, featuring technical support, lifecycle management services, and assured long-term availability.

Based on Intel®'s popular XL710 Ethernet Converged Network Adapter, the XaMC-E01 from Curtiss Wright delivers four independent channels of 10 GbE while it's unique "pigtail" cable feature mitigates the need for custom modifications and provides ease of access for service or upgrade

The VPX3-534 from Curtiss Wright is a high-performance single slot RF digitizing transceiver with two 6 Gsps 12bit ADC channels, also configurable as four 3 Gsps ADC channels, and two 6 Gsps very low latency DAC channels.

Virtex-5 XMC/PMC combines data processing and I/O in a single module The XMC-FPGA05F is available in PMC only, XMC only, or a combined PMC/XMC formats.

Multi-Channel Clock Generator is an ideal source for analog to digital converter sample clock for DSP applications because it was designed with embedded computing in mind by providing a clock source, with up to six phase-matched outputs, packaged in a convenient PMC or XMC board form factor.

3U VPX Virtex-7 FPGA rugged dual-channel 4GSPS ADC/DAC is ideal for SWaP constrained platforms such as UAVs, fighter aircraft and ground vehicles.

A Quad Channel 500MSPS 14-bit ADC FPGA Mezzanine Card providing high-speed, low latency, high-performance functionality necessary for applications such as Signal Intelligence (SIGINT), Electronic Warfare (EW) and RADAR.

Quad Channel 250 MSPS 16-bit ADC FPGA Mezzanine Card that provides low latency, high-performance functionality necessary for applications such as Signal Intelligence (SIGINT), Electronic Warfare (EW) and RADAR.

The XMC-4701 rugged video capture XMC module from Curtiss Wright is designed for high-performance video ingest applications. The XMC module can capture up to four simultaneous video streams from analog and digital sources, with a high-speed DMA-driven capture engine.

The XMC-4730 from Curtiss Wright is a rugged NVIDIA Quadro Pascal GP107-based video processing mezzanine module designed for high-performance video ingest, processing, and display applications.

Rugged, High-performance DO-254 and DO-178C Safety Certifiable 3U VPX/OpenVPX AMD E8860 Graphics and Video Capture Module

An industry leading rugged 3U VPX/OpenVPX is a high-performance graphics controller is well-suited to support embedded training, moving maps, GIS, DVE, and other graphics, video and compute-intensive applications.

3U OpenVPX Intel Ice Lake Xeon D-1700 DSP Processor Card, with Zynq® UltraScale+™ MPSoC FPGA for enhanced security, ideal for Digital Signal Processing, HPEC, Cognitive DSP, AI & Machine Learning in compute-intensive aerospace and defense applications.

3U VPX Data Processing Engine based on Xilinx Zynq Ultrascale+ RFSoC Gen3 integrates multi-gigasample RF data converters and soft-decision forward error correction (SD-FEC) into an SoC architecture.

3U VITA-46 VPX Data Processing Engine based on Xilinx Zynq Ultrascale+ RFSoC Gen3 integrates multi-gigasample RF data converters and soft-decision forward error correction (SD-FEC) into an SoC architecture.

For highly compute-intensive Industrial, Aerospace, and Defense applications where security is critical, the CHAMP-XD1S Digital Signal Processor (DSP) provides enhanced Trusted Computing features alongside leading-edge processing technology for unmatched performance.

6U OpenVPX Intel Xeon D DSP Processor Card available in a range of ruggedized configurations to deliver optimal performance in the harshest deployed environments, including air-cooled and conduction-cooled variants.

3U VPX Intel Xeon D DSP Processor Card that combines the high core count and floating-point performance of the latest Intel Xeon D processors with the substantial bandwidth and system-enabling features of the VITA 3U OpenVPX form factor.

VPX6-197 from Curtiss Wright is an OpenVPX-compliant 6U SBC that combines the performance and the advanced I/O capabilities of the NXP’s quad-core AltiVec-enabled T2080 processor. Designed for space-constrained applications, the VPX6-197 combines the processing power of quad-core dual threaded 64-bit AltiVec-enabled non-throttling computing with a rich I/O complement.

The VME-196 from Curtiss Wright combines the performance and the advanced I/O capabilities of the NXP quad-core AltiVec enabled T2080 processor. The VME-196 is supported by Curtiss-Wright’s U-Boot, Green Hills INTEGRITY, Lynx Software Technologies LynxOS, Yocto NXP SDK-based Linux and Wind River VxWorks 6.9 and 7 Board Support Packages (BSPs) and driver suite

Leveraging Intel’s first-ever embedded Xeon six-core processor with integrated graphics, the VME-1910 from Curtiss Wright is designed to deliver over 60% more processing power than previous four-core designs, and a whopping 35x the performance of Intel’s original Core2Duo processor

The CHAMP-XD4 6U OpenVPX™ rugged processor card is designed for use in very compute-intensive industrial, and aerospace and defense applications, enabling developers of High-Performance Embedded Computing (HPEC) systems to take full advantage of the unmatched performance of today’s leading-edge Intel Ice Lake D architecture

The VPX3-1708 single board computer from Curtiss Wright delivers the next step in performance while maintaining a similar power envelope to previous NXP processor generations. Available in a safety-certifiable variant, the V3-1708, this COTS processor card is designed to reduce the time, cost, and risk associated with getting rugged, safety-critical systems to the field.

The VPX3-1220 from Curtiss-Wright is a high-performance single board computer (SBC) featuring the 7th Generation Intel Kaby Lake Xeon processor. Pin-compatible with the previous generations of Intel SBCs, the VPX3-1220 offers powerful Intel processing in the small 3U form factor and is specifically designed with low-power technologies to meet today’s size, weight, and power (SWaP) challenges.

The VPX3-1262 from Curtiss-Wright Defense Solutions is a rugged, high performance 3U OpenVPX™ Single Board Computer (SBC) designed to meet the demanding performance needs of next-generation SOSA Aligned processing systems

Rugged, high-performance 6U OpenVPX Intel Xeon W Single Board Computer (SBC) excels in harsh environments, making it ideal for architecting high-performance computing and processing systems.

The VPX3-673A from Curtiss Wright is a rugged 3U OpenVPX™ A-PNT module designed to ingest positioning data from multiple sensors and output consistent timing and navigation information to the warfighter

The VPX3-1707 is an OpenVPX™ compliant 3U single board computer (SBC) offering incredible processing capability at remarkably low power.

Safety-certifiable SBC from Curtiss-Wright that offers advanced I/O capabilities, high-density computing in the smallest standard form factor with the lowest power possible.

High Performance 3U OpenVPX, DO-254 / DO-178C safety-certifiable SBC built around NXP Layerscape LS1043A ARM quad-core A53 processor with advanced I/O capabilities

The VPX3-1260 rugged 3U OpenVPX 9th Gen Intel Xeon SBC delivers full-featured, all-in-one processing for high-performance embedded computing, general-purpose processing and C5ISR applications.

Rugged, high-performance 6U OpenVPX Intel Core i7 Broadwell Single Board Computer (SBC) excels in harsh environments, making it ideal for architecting high-performance computing and processing systems.

3U VPX SBC with NXP Power Architecture T2080 SBC is up to the challenging task of delivering high density computing that packs the greatest functionality into the smallest standard form factor.

3U VPX Intel Core i7 Broadwell SBC with up to 32 GB of high speed SATA flash memory, is ideal for handling complex applications with demanding sensor processing requirements, or high speed data processing, logging and storage needs.

Low-cost, high performance, high speed DDR3 memory 6U VME Single Board Computer based on the 4th Generation Core i7 "Haswell" Processor, with VxWorks 6.9, WES7, LynxOS, and Fedora Core BSPs.

6U VITA-46 VPX Intel ATOM based Designs (Intel ATOM SBC) based on E640T Intel ATOM Processor provides high-performance, low power architecture with various I/O capabilities.

A Quad Power Architecture Digital Signal Processing Engine that utilizes the 6U VPX-REDI format with eight NXP Power Architecture MPC8641 processor cores (four 8640D dual-core processors).

The VPX3-687 from Curtiss wright is a versatile and high-performance Ethernet switch designed to connect the next generation of 3U systems.

The Curtiss-Wright VPX3-655 is a very versatile Ethernet switch supporting 1G, 10G and 40G ports, including 12x 10GBASE-T ports, providing high-speed connectivity for modular embedded computing applications.

The VPX3-663 hybrid switch from Curtiss Wright combines PCI Express 3.1 and 10 Gigabit Ethernet switching in a single 3U VPX module.

The versatile, high-performance VPX3-6826 Ethernet switch from Curtiss Wright provides rugged Ethernet switching for the next generation of 3U systems. It is developed in alignment with the Sensor Open Systems Architecture™ (SOSA) Technical Standard to ensure interoperability with today’s latest VPX systems.

Designed to provide a complete networking solution for VPX systems. Curtiss-Wright VPX6-688 Gigabit Ethernet switch is ideal for a wide range of embedded computing and vehicle network applications.

Fully-featured Gigabit Ethernet Switch designed to provide a complete networking solution for VME systems. Suitable for a wide range of embedded computing and vehicle network applications, the VME-690 provides 20 ports of standards-compliant 1000BASE-T Gigabit Ethernet to the VME backplane.

A combined Data Plane and Control Plane high-performance Switch for small, mid-size and large 6U VPX systems. The VPX6-6802 Data Plane fabric supports both Ethernet and InfiniBand protocols.

Low Power 3U VPX 20-port fully featured Layer-2 managed Ethernet switch that provides up to 20 ports of copper Ethernet connectivity designed to support advanced network architectures for the defense industry.

12-port Rugged Gigabit Ethernet Mezzanine Switch that supports "in-chassis" networks with managed Layer-2 switching capabilities. The XMC-651 XMC/PMC Ethernet Switch is an ideal low-cost zero-slot Ethernet switching solution that can be added to any base card with an XMC/PMC mezzanine slot.

GNAT Pro Enterprise is a complete development environment for producing critical software systems where reliability, efficiency and maintainability are essential.

Scade One is a model-based solution for developing embedded applicative software, enabling a seamless Model-Based Systems Engineering (MBSE) process.

Ansys Twin Builder is an open solution that allows engineers to create simulation-based digital twins with Hybrid Analytics.

Predicts the illumination and optical performance of systems to save on prototyping time and costs while improving product’s efficiency.

A highly optimizing compiler toolchain to build fast and tight code for safety-certified use cases.

Model-based development environment for reliable embedded software, with linkage to requirements management, model-based design, verification, qualifiable/certified code generation capabilities and interoperability with other development tools and platforms.

Empowers you to prototype and design ARINC 661 compliant systems, embedded Cockpit Display Systems (CDS) and User Applications (UA).

Systems and Software Lifecycle Management software features requirements traceability via Application Lifecycle Management (ALM) tools, traceability from models, configuration and change management, and automatic documentation generation.

Design robust embedded displays for human machine interfaces with native support for the OpenGL® SC1 & SC2 (Safety Critical) and ES1 & ES2 (Embedded system) standards

Based on the DDS standard, Connext Secure is the trusted software framework for architecting and securing systems of systems.

Software framework designed to meet the demanding connectivity requirements of smart-world systems.

The first software framework for resource-constrained real-world applications.

The first safety-certifiable software framework for safety and mission-critical real-world systems.

A commercial-grade Linux distribution built on the robust foundation of eLxr, a Debian-based operating system tailored for modern edge and cloud environments.

An RTOS platform for safety-critical applications that require DO-178C, IEC 61508, ISO 26262, IEC 62304, or certification evidence in the avionics, industrial automation, transportation, and medical device industries.

An integrated modular avionics (IMA) platform enabling workload consolidation of safety-critical and less critical applications

Wind River® Linux enables you to develop, deploy, and operate robust, reliable, and secure embedded solutions running on a purpose-built Linux operating system.

The World’s Leading Real-Time Operating System for the Intelligent Edge.

Ansys medini analyze implements key safety analysis methods (HAZOP, HARA, FHA, FTA, FME(C)A, FMEDA, etc.) in one integrated tool. It supports the efficient and consistent execution of the analysis activities that are required by safety standards.

An RTOS platform for safety-critical applications that require DO-178C, IEC 61508, ISO 26262, IEC 62304, or certification evidence in the avionics, industrial automation, transportation, and medical device industries.

An integrated modular avionics (IMA) platform enabling workload consolidation of safety-critical and less critical applications

Model-based development environment for reliable embedded software, with linkage to requirements management, model-based design, verification, qualifiable/certified code generation capabilities and interoperability with other development tools and platforms.

Empowers you to prototype and design ARINC 661 compliant systems, embedded Cockpit Display Systems (CDS) and User Applications (UA).

Systems and Software Lifecycle Management software features requirements traceability via Application Lifecycle Management (ALM) tools, traceability from models, configuration and change management, and automatic documentation generation.

Design robust embedded displays for human machine interfaces with native support for the OpenGL® SC1 & SC2 (Safety Critical) and ES1 & ES2 (Embedded system) standards

Handheld system for the real-time detection and location of buried and hidden objects like Anti-tank Mines, Anti-personnel Landmines (metal and non-metal) and IEDs in variety of soil conditions such as Sand, Red, Laterite, and Black Cotton.

Portable handheld RADAR for the detection and location of static and/or moving targets, especially humans behind solid barriers or walls.

A rugged system consisting of RF Up/Down Conversion using a modulator and demodulator that provides combined data acquisition and processing on a single platform.

Compact T/R Modules designed for Phased Array RADARS operating in S-Band based on GaN (Gallium Nitride) technology. Delivers high efficiency in a compact size with a 100W Peak Transmit Power Capability per channel.

FPGA based platform for effective communication between IFF RADAR sub-systems. The IFF-CIU has been qualified to confirm to Environmental (MIL-810F) and EMI-EMC (MIL 461E) based tests.

Small footprint S-Band 150W, GaN (Gallium Nitride) based device operates in Pulsed Mode and requires 50V DC Supply.

An S-Band based Dual Transmitter Receiver Module (DTRM) with a GaN-based Power Amplifier that helps minimize the size and complexity of the overall amplifier module while ensuring increased efficiency and high-power operation of a radar system.

Designed to provide all oscillator requirements for C-Band RADAR system using DDS techniques. With the power supply modules built into the system, the entire box is self contained with connector for 28V input power connector.

The Multi-Platform Mission Computer MPMC-9365 mission computer is a leading-edge, flexible and rugged processing system that can be readily configured to meet any military or aerospace requirement.

MPMC-961x Application Ready COTS rugged integrated system is the perfect solution to modularly expand capabilities on any system.

The MPMC-965x is an integrated information processing system, providing complete hardware and software solutions.

The MPMC-9366 Multi-Purpose Modular Computer is a flexible, high-performance RF processing system packaged in a rugged enclosure for military and aerospace environments deployment.

The MPMC-9337 packs high-performance Intel® and NVIDIA® processing into a highly rugged 3U OpenVPX™ chassis, for deployed GPGPU-based signal/image processing applications that require additional onboard processing power, but must limit their size, weight and space (SWaP) burdens.

The Parvus DuraCOR 313 is an ultra-small form factor (USFF) rugged embedded computer based on a low-power, quad-core Intel Atom x6400E Series (Elkhart Lake) processor equipped with unparalleled modularity for add-on I/O cards and data storage in a fanless IP67-rated miniature design.

The Parvus DuraCOR 312 is an ultra-small form factor (USFF) modular mission computer built around the high-performance, yet power efficient NVIDIA Jetson TX2i supercomputer-on-a module integrated in a miniature rugged chassis.

The Parvus DuraCOR 311 is an ultra-small form factor (USFF) rugged embedded computer/controller based on a low-power, quad-core Intel Atom E3845 (Bay Trail-I) processor equipped with a rugged Flash disk and PCIe-Mini Card I/O expansion slots.

Optimally designed for size, weight, and power (SWaP)-sensitive mobile, airborne, ground, sea vehicle and sensor applications, the Parvus DuraCOR 8043 combines powerful graphics and multi-core processing with ultra-reliable modular, mechanical robustness in a fanless IP67 design optimized for demanding civil and military platforms.

Featuring military-grade ruggedization in a fanless IP67 aluminium enclosure, the DuraCOR AGX-Xavier enables system integrators to harness the supercomputer-class capabilities of the NVIDIA® Jetson AGX Xavier module.

Multi-platform Modular, Rugged 3U 5-slot Mission Computer that supports OpenVPX architecture. It can be readily configured to meet the needs of any military or aerospace requirements, from benign laboratory to harsh avionics environments.

Compact Signal/Image Processing 3-slot 3U VPX™ System in a rugged enclosure providing 500GFLOP* performance with a quad-core Intel Core i7 processor with NVIDIA Fermi GPGPU capabilities.

The High-Speed Recorder 10 (HSR10) is a commercial off-the-shelf (COTS) high-speed network recorder and NAS device for use in 10 GbE architectures that demand high data throughput.

With two multi-core Intel® Xeon® D processors
and two 40 Gigabit Ethernet (GbE) ports, the HSR40 can handle the most demanding sensor recording applications.

The Data Transport System 3-slot (DTS3) is a rugged Network Attached Storage (NAS) file server for use in mobile vehicles, field ground stations, and aircraft.

The DTS1X is a rugged ready to deploy data-at-rest network attached file server that supports a 10 GbE interface with removable memory and two layers of encryption.

Rugged, high-performance, reliable and power-efficient NAND flash State Drive (SSD) solution designed for defense and industrial applications.

MIL-rugged 26-port Cisco IOS®- managed L2/L3 embedded Ethernet switch to operate in the harshest deployed military, aerospace, and industrial applications.

Rugged 16-port Managed Gigabit Ethernet Switch System with a power-efficient switching fabric providing non-blocking wire-speed gigabit performance for 16 ports of 10Mbps, 100Mbps or 1000Mbps Ethernet connections.

Ultra-small form factor (SFF), rugged, Commercial Off the Shelf (COTS) 8-port Gigabit Ethernet (GbE) switch optimized for extremely demanding size, weight, and power (SWaP) constrained vehicle and aircraft platforms.

Ethernet Switch and Vehicle Management Computer (VMC) built around a small and lightweight rugged chassis provide 16 ports of tri-speed 10/100/1000Base-T Ethernet with a variety of flexible network switching features such as VLANs, multicast, and Quality of Service.

IRIG 106 compliant, FPGA-based PCM Telemetry Encoder with Data Acquisition, Conversion, Frame processing and PCM output section has been subjected to environmental test and has been qualified for airworthy application.

Multi-channel PCM encoder with 1W transmitter, 1.5Ah Li-ion battery pack and 11-channel MEM sensor measures 60mm x 60mm x 80mm, and is smaller than a coffee mug.

Multi-channel PCM encoder for a power range of 1W to 2W telemetry application, The Integrated Telemetry System integrates multi-channel PCM encoder, 1W transmitter, Transmitter antenna and 30 sensors of different types.

Microcontroller and FPGA based telemetry system that supports up to 62 electrical channels over-voltage and short circuit protection, expandable up to 256 channels, with two 1553B channels.